YCP 75.5mm Vitara Pistons & Custom Length D16 Connecting Rods Combo

Description

The proven record setting combo! Introducing the P2P0 Spec custom length Vitara piston connecting rods and YCP Vitara pistons for the D16 engines.

These I-Beam connecting rods were designed and custom made to maintain proper deck height with the popular Vitara pistons. This allows for higher compression and which reduces spool time and increases efficiency.

When paired our P2P0 Spec YCP Vitara pistons with friction reducing Teflon™ coating. This combination of specially selected parts has been proven to hold 500+ WHP when properly built and tuned.

P2P0 D16 Vitara Spec Connecting Rods

Center to center: 5.458” (138.63mm)
Big End Diameter: 48mm
Connecting Rod Material: Forged 4340 Steel
Connecting Rod Finish: Shot-peened
Weight matched: +/- 1 gram
Wrist Pin: Floating 19mm
Connecting Rod Bolt Diameter: 3/8”
Connecting Rod Bolt Brand: ARP 2000
Connecting Rod Bolt Tensile Strength (psi): 220,000
Block notching Required
Includes

Connecting rods (4)
3/8” ARP 2000 rods bolts (8)
1 Packet ARP Assembly lube
The P2P0 Spec YCP Vitara pistons are custom made with friction reducing Teflon™ skirt coating. YCP Vitaras are proven to set high HP records. Others may claim they have a superior piston but YCP has been proven time and again.

P2P0 Spec YCP 75.5mm Vitara Pistons with NPR Rings

Vitara Spec Bore: 75.5mm (0. 5mm Oversized)
Coating: Teflon™ Skirt Coating
Piston Material: High strength AC8A grade casting
Piston Heat Treatment: T6 Stress Relieving
Wrist Pin: Floating 19mm
Wrist Pin Material: 9310 Case Hardened
Wrist Pin Retention: C Clip
Dual Wrist Pin Oiling Holes
Piston Ring Material: N-51 Gas Nitride treated
Dish Volume: -15.00cc
Compression Height 28.30mm
Includes

Vitara Piston (4)
NPR Ring Sets (4)
C Clips (8)
Wrist Pins (4)