YCP USDM D15B7 75.5mm Vitara Pistons Hastings Rings & Custom Length Rods ARP2000

SKU: EI-PK-RK-USDM-75.5MM Categories: ,


Calculate Shipping


What everyone has been asking for, a Vitara piston connecting rod solution for the common and plentiful USDM D15B7 engines. Introducing the P2P0 custom length Vitara piston connecting rods for the USDM D15B7 engines (45mm rod journals).

These H-Beam connecting rods were designed and custom made to maintain proper deck height with the popular Vitara pistons. This allows for higher compression and which reduces spool time and increases efficiency. Best part is that these rods require minimal to no block notching.

Paired with our P2P0 spec YCP Vitara pistons with friction reducing Teflon™ coating. This combination should have no issues holding 350-400WHP when properly tuned.

P2P0 USDM D15B7 Vitara Spec Connecting Rods

Center to center: 5.368” (136.34mm)
Big End Diameter: 45mm
Connecting Rod Material: Forged 4340 Steel
Connecting Rod Finish: Shot-peened
Weight matched: +/- 1 gram
Wrist Pin: Floating 19mm
Connecting Rod Bolt Diameter: 3/8”
Connecting Rod Bolt Brand: ARP 2000
Connecting Rod Bolt Tensile Strength (psi): 220,000
Minimal to no block notching (Check your clearances!)

Connecting rods (4)
3/8” ARP 2000 rods bolts (8)
1 Packet ARP Assembly lube
P2P0 Spec YCP 75.5mm Vitara Pistons with NPR Rings

Vitara Spec Bore: 75.5mm (0.5mm Oversized)
Coating: Teflon™ Skirt Coating
Piston Material: High strength AC8A grade casting
Piston Heat Treatment: T6 Stress Relieving
Wrist Pin: Floating 19mm
Wrist Pin Material: 9310 Case Hardened
Wrist Pin Retention: C Clip
Dual Wrist Pin Oiling Holes
Piston Ring Material: N-51 Gas Nitride treated
Dish Volume: -15.00cc
Compression Height 28.30mm

Vitara Piston (4)
NPR Ring Sets (4)
C Clips (8)
Wrist Pins (4)

D16 block + crank
Head (d16y8 head gasket) P2P0 Custom Length Rods Stock Length Rods
d15b7 – d16a6 7.63:1 6.60:1
d16z6/y7 – d15b 8.06:1 6.90:1
d16y8 8.31:1 7.08:1

Additional information

Weight 10 lbs
Dimensions 12 × 8 × 5 in